5
Preparation
Please read all of the instructions below before beginning your installation. We recommend that
you have your unit installed by an experienced car navigation system installer
.
Features
Features
Features
Features
�
Double DIN size, all-in-one highly integrated entertainment system
�
Built-in DVD Player, automotive specification slot loading mechanism
�
Built-in FM/AM Tuner,
�
High resolution 6.2”(16:9) TFT color monitor, contrast and brightness adjustment
�
Built-in 40W X 4 output amplifier, 4.1 channel surround sound output.
�
Dual zone function with easy operation.
�
Smart Touch-screen operation
�
All functions can be operated by touch screen,included Remote Controls
�
Built-in iPod Control, Navigation system
�
Powerful Graphic User Interface and software update ability.
Tools
Tools
Tools
Tools and
and
and
and Supplies
Supplies
Supplies
Supplies
We suggest using these tools and supplies to install the unit.
• Torx type, flat-head and Philips screwdrivers
• Wire cutters and strippers
• Tools to remove existing radio (screwdriver, socket wrench set or other tools)
• Electrical tape
• Crimping tool
• Volt meter/test light
• Crimp connections
• 18 gauge wire for power connections
• 16 – 18 gauge speaker wire
• Heatshrink tubing
• Soldering iron and solder
WARNING!
WARNING!
WARNING!
WARNING!
1. Only connect the unit to a 12-volt negative ground system.
2. Never install this unit where operation and viewing could interfere with safe driving conditions.
3. To reduce the risk of a traffic accident (except when using for rear view video camera) never
use the video display function while driving the vehicle. This may be in violation of local laws.
4. Never disassemble or adjust the unit without the assistance of a professional. For details,
please consult your local car stereo specialty shop.
5. To prevent injury from shock or fire, never expose this unit to moisture or water.
6. Never use irregular discs, the only recommended disc size is a 12cm round disc.
7. To prevent damage to the mechanism inside this unit, avoid impact to the TFT monitor.
8. Do not change the fuse on the power wire without professional guidance. Using an improper
fuse may cause damage to the unit and result in a fire.
9. The monitor employs an automatic motorized mechanism. To prevent damage to the core
mechanism, please do not push, pull or swivel the monitor manually.
Disconnecting
Disconnecting
Disconnecting
Disconnecting the
the
the
the Battery
Battery
Battery
Battery
To prevent a short circuit, turn off the ignition and remove the negative (-) battery cable prior to
starting the installation.
NOTE
NOTE
NOTE
NOTE
: If the unit is to be installed in a car equipped with an on-board drive or navigation
computer, do not disconnect the battery cable. If the cable is disconnected, the computer memory
may be lost. Under these conditions, use extra caution during installation to avoid causing a short
circuit.
NOTE
NOTE
NOTE
NOTE
: It is especially important that you read the
WARNING
WARNING
WARNING
WARNINGS
S
S
S
and
NOTE
NOTE
NOTE
NOTES
S
S
S
in this manual
