35
Pairing
Pairing
Pairing
Pairing
Access the Bluetooth setup and press “Handsfree” or “AV Unit”option on the screen, then “Wait
pairing” displays on the screen. Now you can pair a phone with the unit.
This unit can pair with 5 mobile phones in all, but just one can be active at a time.
The Default phone will be retained only if all other paired phones are deleted. (Default Phone: The
phone that was first paired with the unit.)
When maximum pairing has been completed, that is, four mobile phones have been connected
with the unit, and you want to still pair a new one, then the system will retain the default phone and
last used phone used. The phone least used (except the default phone) will be deleted and the
new paired phone will become the last used phone. (Last Used Phone: The phone connected with
the unit that was used last.)
If you want pair your phone with the unit, the password 1234 is used to complete the pairing. When
asked, enter this password in the phone you are pairing with this unit.
Note: when you press “handsfree”, the unit won’t activate A2DP function.
Auto
Auto
Auto
Auto Connect
Connect
Connect
Connect
If the unit has been set to auto connect, it will attempt to connect to the last used phone first. If Auto
Connect is not activated, the unit will return to the previous operating mode.
When the phone connects to the unit successfully, all of the cell phone’s Bluetooth enabled options
will be active.
Making
Making
Making
Making a
a
a
a phone
phone
phone
phone call
call
call
call
There are four ways to make a phone call from this unit:
1. Make use of the Number dial on the screen to make a call.
2. You can enter the phone number using the numeric keypad and press the
OK
OK
OK
OK
button on the
remote control to make a call. (must be in the Bluetooth mode)
3. You can open the phone book and select one to make a call directly. (Your cell phone must
support this option)
4. If your phone supports voice dial, access this mode on your phone instead of using the
Phonebook
Answering
Answering
Answering
Answering an
an
an
an incoming
incoming
incoming
incoming call
call
call
call
You can answer an incoming call even if the source other than the telephone is selected.
You can answer an incoming call automatically or manually (refer to Bluetooth setup and the
Controls and Indicators title (Button Operation) for exact instructions)
When a call comes in, this interface will display on the screen:
Connect
Manual
If this function is set to Auto, connection between
the Last Used phone and this unit will take place
automatically as soon as the devices are less than
a few meters apart.
Auto
