15
5. Press Call key to place a Skype call.
To Set User Status
1. Select
Skype
under menu mode;
2. Select <
User Status
> under
Skype
mode;
3. Press Left key, then the display shows the selection status;
4. Press Scrolling button to select the status you wish to set;
5. Press Left key to save.
Resetting the system
If you have set a PIN and forgotten it, you need to reset the system. The Base PIN will be reset
to 0000. If you reset the system, you will lose all stored information (including numbers in
memory) and all features will return to their default settings. You need to register the handset
to the base unit again.
While you are resetting the system, you should disconnect the telephone line cord from the
back of the base unit, so you won't be interrupted by incoming calls. To reset the system
without the PIN:
1. Disconnect the power lead from the back of the base unit
2. Press and hold the
HANDSET LOCATOR
button in the base unit, at the same time
connect the power lead into the back of base unit. Release the
LOCATOR
button after
you hear “beep” sound for five times. The IN USE light on base unit lights during this
whole process.
3. After 2~3 seconds, you can hear “beep” sound for two times again and the IN USE light
goes off;
4. Disconnect the power lead from base. Reconnect and you will hear a confirmation tone
from the base unit.
Intercom and transfer
To Make an Intercom Call
1. Press the INT key. You hear Dial tone
2. Key in the number of the other handset
On the other handset's display, your number appears, and the
INT
symbol flashes. Then the
other handset user presses the Call key to connect the call.
For details of how to change the ringing melody and volume for intercom calls, see "INT
MELODY" and "INT VOLUME" under "HANDSET SETTING" part.
To End an Intercom Call
Press the Call key on your handset. The other person will hear Busy tone, and also need to
press the End key to hand up.
To Transfer a Call
To transfer the outside call to another handset (if you have two or more
handsets):
1. Press the INT key and key in the number of the other handset.
2. The outside call is put on hold. When the other handset answers, you can speak to the
user. If the other handset does not answer, you can get back to the outside call by
pressing the INT button again.
To transfer the outside call to another outside phone (Network Dependent):
1. Press the Recall key and key in the call number you want to transfer.
2. The outside call is put on hold. When the call answers, you can speak to the user, then
press the End key to hang up and transfer the call.
