SP9600 User Manual
3
Attention
All wireless data transferring trackers produce interference that may affect other
trackers which are placed nearby.
The tracker may be connected only by qualified individuals.
The tracker must be firmly fastened in the predefined location.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
Instructions Of Safety
By following these requirements and recommendations you will avoid dangerous
situations. You must read these instructions carefully and follow the strictly before
operating the tracker!
Please install the batteries carefully according this user manual indicates to avoid short
circuit that may causes malfunction of tracker.
Before usage, the tracker should be placed so that its LED indicators are visible, which
show what status of operation the tracker is in.
When connecting the connection cables to the vehicle, the appropriate jumpers of the
power supply of the vehicle are recommended to be disconnected.
Before dismounting the tracker from the vehicle, the connection must be disconnected.
Copyright and Disclaimer
The User Manual may be changed without notice.
Without prior written approval of Skypatrol LLC., this User Manual, or any part thereof,
may not be reproduced for any purpose whatsoever, or transmitted in any form, either
electronically or mechanically, including photocopying and recording.
Skypatrol LLC. shall not be liable for direct, indirect, special, incidental, or consequential
damages (including but not limited to economic losses, personal injuries and loss of
assets and property) caused by the use, inability, or illegality to use the product or
documentation.
