4
1.1.12 Always put the Cup Lid Nº.02 (Pic. 01) in the blender before turning the equipment
on.
1.1.13 Always hold the Cup Nº.03 (Pic. 01) while the blender is operating.
1.1.14 If the Cup Nº.03 (Pic.1) falls out, immediately turn the equipment off.
1.1.15 When processing hot liquids, remove the Over Lid Nº.01 (Pic. 01) from the Lid Nº.01
(Pic. 01) and keep the hands far from the hole in the lid, to avoid potential burnings.
1.1.16 Never touch the blades with the equipment running.
1.1.17 When doing the electrical installation of the equipment, connect the ground cable
as per local safety standards;
1.1.18 Do not use the equipment outdoors.
1.1.19 Do not leave your blender operating without supervision.
1.1.20 This equipment does not replace kitchen utensils. It does not mash potatoes, beat
egg whites or substitutes for cream covering, does not grind raw meat or mix hard dough,
does not extract fruit or vegetable seeds.
1.1.21 Remember that the blender does its processing in seconds, not in minutes.
Therefore, never leave the blender operating for periods longer than 01 (one) minute.
Turn it off and verify the consistence of the product after a couple seconds to avoid that it
will be over processed.
1.1.22 Overloading the equipment with heavy or big portions will reduce the blender’s
working life. If the motor stops, turn it off immediately, unplug the cable from the power
outlet and take part of the product out before reinitiating the operation.