3
01 - Pusher.
02 - Head.
03 - Head Ring.
04 - 110/220 Volts Selector Switch.
05 - Tray.
06 - Casing.
07 - Handle.
08 - ON/OFF Switch.
Picture - 01
2 Main Components
05
06
07
08
01
02
03
04
6
7 Desassembling the Head
IMPORTANT - Always disconnect the machine from the electricity supply before taking the
head off. After being sure the machine is disconnected from the electricity supply, use the
following procedure (The following figures are those of picture 02):
a - Take out the pusher and the tray;
b - Remove the head Ring No. 07, turning it clockwise;
c - Remove the inside head components as shown on picture 02, you do not need to take out
the head to remove the components;
d - If necessary to take the head off, proceed as follows:
loosen the handle No. 07 (picture 1) on the left side of the head, hold the head and move it left and right
pushing it towards the front side at the same time.
IMPORTANT - When assembling the head you shall be very careful to place each
component in the right position. If you do not follow the right order it will cause irreparable
damage to the grinder.
06
07
02
01
03
04
05
01. Head
02. Fiber Washer
03. Worm
04. Worm Pin
05. Knife
06. Disc
07. Head Ring
Picture - 02
Содержание PCI-22
Страница 1: ...Meat Grinder Model PCI 22 09949 0 August 99 User Guide...
Страница 2: ......
