04
....Remove the thick sauces, butter, mayonnaise and similar consistence products
removing the blender base and pushing the mixture through the cup lower side .
....rop the liquid or semi-liquid mixtures, straight into the blender cup.
.... Never put hot ingredients inside the cup, let them cool down first.
You should not:
… expect your blender to replace any other kitchen appliance. It is not supposed to
make mashed potatoes, it does not blend egg white or any other cream for covering, it does
not grind raw meat, it does not blend hard pastas and do not extract kernels from fruits and
vegetables.
…process mixtures too long. Remember that the blender works in seconds and not
in minutes. Therefore, never let your blender working for more than one minute. It is better to
switch it off and check the mixing consistency after a few seconds to avoid too much
blending.
… overload the motor with big or heavy portions as it will make the blender's life
shorter. If motor stops, switch it off immediately, unplug and remove part of the load before to
start operation again.
3 - OPERATION
3.1 – Starting
Starting the Blender is achieved through keys No.01 and No. 03 (Pic.03) and the
Timer Knob No 02 ( Pic. 03 ) placed on the motor housing .
The Timer Knob allows to choose the processing time span , between 10 and 45 seconds .
Picture 03
ON/OFF Switch No. 03 (Pic. 03 ) :
The first press onto the switch starts the selected time span, the blender will
automatically stop when the time is over .
A second press will stop the blender during the time span .
Pulse switch No 01 ( Pic. 03 ) starts the blender and will keep it running as long as it
remain pressed .
IPORTANT
Do not use the blender to process products similar to “ AÇAI
dough “ Do not run the blender without a load, because
irreparable damage will occur .
1
2
3
09
4.4 Operation
4.4.1 Advice
Be sure your hair is not loose in order to avoid getting caught by turning parts which
could lead to a serious accident. Tie your hair well up and/or cover your head with a scarf.
The operation performed by not trained or skilled personnel shall be forbidden.
Never touch turning parts with your hands or in any other way.
NEVER operate machine without all original safety devices under perfect
conditions.
4.5 After Finishing The Work
4.5.1
Precautions
Always TURN THE MACHINE OFF by removing the plug from the socket before
cleaning the machine. Never clean the machine unless it has come to a complete stop.
Put all components back to their functional positions before turning it ON again.
Check level of oil. DO NOT place your fingers in between belts and pulleys nor chains
and gears.
4.6 Maintenance
4.6.1
Danger
Any maintenance with the machine in working situation is dangerous. TURN IT
OFF BY PULLING THE PLUG OFF THE SOCKET DURING MAINTENANCE.
4.7 Advice
Electrical or mechanical maintenance must be done by qualified personnel for
such operation.
Person in charge has to be sure that the machine is under TOTAL SAFETY
conditions when working.
5. PROBLEMS ANALYSIS and SOLUTIONS
5.1 Problems, Causes and Solutions
The Professional Blenders have been designed to need minimum maintenance.
However, some performance failures may happen due normal wear during the machine
lifetime.
If some problem arises with your Professional Blenders , check Table - 02 as
follows, where there are detailed some recommended possible solutions.
