19
CHART 02
PROBLEM
CAUSES
SOLUTIONS
- The blender does no switch
ON.
- Electricity shortage.
- Problem with the
blender electric circuit.
- Check electricity.
- Call technical assistance.
- Burning smell or smoke.
- Problem with the blender
electric Circuits.
- Call technical assistance.
- The blender starts, but after
to place the ingredients inside
the cup , the blender rotation
is too low.
- Problem with the motor.
- Call technical assistance.
- Damaged cord.
- Problem during transportation. - Call technical assistance.
-Unusual noises.
- Damaged bearing
- Call technical assistance.
-The product does not
process.
- Product pieces too large do not
allow contact with the knife.
- Blunt knife.
- Cut smaller pieces about 3,5
cm.
- Call technical assistance.
- Cup leaking
- Problem in the sealing system. - Call technical assistance.