Assembly & Operation Manual
TAIL PIPE THRUST VECTORING
Secure the 2 vectoring servos to mounts. Make sure servos are centered.
Make up 2 pushrods for X—and Y– axis. Fit pushrods to servos.
Slide rear tail pipe into nozze. Bolt rear pipe to nozzle.
Bolt stand-offs to nozzle former. Bolt vector pipe to stand-offs.
Slide nozzle over tail pipe and secure to fuselage with 3 bolts. Make sure pushrods
move freely through nozzle section.
Fit pushrods and use incidents meter to check 0 degree when servo horn is 90 de-
gree.
P-20
Photo 62
Photo 63
Photo 64
Photo 65
Photo 66
Photo 67
Photo 68
Photo 69
Photo 70
