Skymaster DVR 9200, Руководство по эксплуатации

Страница: 31 / 40

69
13. Trouble-shooting guide
39743
No Function Note the position of the mains switch and switch the unit on if necessary
(5.1 Operating element, Rear side of device, Page 46, Item 8).
No antenna signal (no signal indication on the device and via the signal indications in the OSD):
1. First check the antenna cable: The shielding braid and the aluminium foil must
have contact with the F-plug and must not touch the internal conductor!
2. Check the LNB settings. LNB1 should be set for ASTRA satellites. If you are
using a standard Universal LNB, the values 9750 MHz and 10600 MHz must be
set for the lower and upper frequency. For trouble-shooting you should directly
connect the LNB and the receiver, removing the switch and distributor first of
all.
Malfunctions
1. The device displays incorrect programme times in the EPG or the wrong time:
When the receiver is switched on, the data must be loaded and evaluated first
of all. Depending on the transponder, this process can take some time.
Sometimes it may be necessary to call up the EPG again or to change the
programme location.
2. The device is no longer responding: The receiver needs to process a large
amount of different data and sometimes responds like your home PC: It
crashes. A changeover when receiving EPG data or “unclear” data from the
programme provider can result in a crash. Simply remove the mains plug and
wait a few seconds before switching the device on again. If a software error is
involved, you can quickly load a software update onto the receiver via satellite.