Skymaster DVR 9200, Руководство по эксплуатации

Страница: 19 / 40

57
9. Main menu
39743
1.4 Advanced search
Select “user-defined search” from the “Installation” menu and confirm the
selection with “OK”. You can get more information about “user-defined
search” from your dealer, from the Internet or from satellite magazines.
Satellite name: Select the name of the satellite.
TP Frequency: TP frequency values can be set with “ ”, “ ” or the
number keys.
Polarity: Select a value from (Hor/Ver/Left/Right) to set the exact polarity.
Symbol rate, Video PID, Audio PID,
PCR PID: Select the correct value with the number keys.
Go To: If a pre-set position of the antenna exists, it sets the antenna on
this position.
1.5 Update channels
Deleted channels and fresh information about already searched channels are
searched and updated.
All satellites: Updates information about all the satellites that are
configured in the antenna settings.
Current TP: Updates the information about channels on the same
transponder TP such as the current programme.
Current network: Updates the information about the channels offered by
the satellite carrier.
1.6 Factory reset
The “Factory reset” function deletes all setting changes made by you,
including the child lock and the favourite channels, and resets the factory
settings. After you select “Factory reset”, the system displays a warning
(see picture). Press the “OK” key and all the information will be reset to the
factory settings.