Skymaster DVR 7400, Руководство по эксплуатации

Страница: 6 / 40

46
4. Information on direct satellite reception
39740
For precise alignment of the antenna, the complete cabling must now be connected.
The television and the receiver should be located in the immediate vicinity of the antenna.
It is almost impossible to align the reception system by “shouting” e.g. from a distant television. A SAT finder (art.
no. 37351) or the signal strength indicator on a digital receiver is ideal for aligning the antenna.
Leave the equipment disconnected from the mains supply until cabling is complete!
Connect the antenna cable to the LNB. Carefully introduce the copper-coloured internal conductor of the cable into
the LNB socket. Place the thread of the plug directly onto the socket and screw the plug as tightly as you can by
hand. Fix the other end of the cable to the jack on the satellite receiver in the same way (LNB IN).
With a scart cable, connect the scart socket of the receiver (TV) to the scart socket of your television.
Your cabling now looks like this:
RECEIVER
LNB
SAT-ANTENNE
Please insert the provided batteries into the remote control.
Now connect your television and the receiver to the mains.
Press the Stand By
button on the receiver or on the remote control.
It may be necessary to switch your television into so-called A/V mode. You can do this with the remote control on
your television. The procedure is different for each television unit. The relevant button could be marked
0 , AV or
EXT . Please refer to the instructions for your television.