Skymaster DCI 35, Руководство по эксплуатации

Страница: 6 / 22

GB 4
Start
5. Daily Use
The most important basic functions and displays (OSD) are described in detail below.
While watching a TV channel or listening to a radio station, various information and symbols are
displayed for the channel/station. The actual content and scope of this information depends on the
channel provider, e.g. Teletext or AC3 digital sound. Further useful functions of your receiver are
explained later on in these instructions.
After changing the channel, the following information is displayed at the bottom of the TV screen:
Number of the channel position
Name of the channel
Programme times and title of the current programme
Teletext availability
Part of a favourites groups (symbol)
Audio channel (stereo, left or right)
Audio mode, current language, AC3 sound availability
Date
Time
Satellite
Reception parameters (frequency, level)
Select channel:
There are several possibilities to select a channel. To change channels (upwards/downwards), use
the
/ buttons at the front of the receiver or the CH+ / CH- buttons on the remote control.
In addition to the functions described above there is (for the high number of receivable channels) a
more practical channel selection function:
While watching a TV channel or listening to a radio station, it is possible to open a channel list via
the
OK button. Hide the list via EXIT . Use the CH+ and CH- buttons to select the desired channel
from the list and the OK button to switch to the channel. Since the channel lists usually contain
hundreds of channels, it is also possible to use the PAGE and PAGE buttons to leaf through
the channel list faster.
❮
❮
❮
❮
Guided installation
After first installation of receiver or after reset the sub menu “guided installation” appears on screen
in german language.
The receiver is pre-set for program on Astra 19,2°, Hotbird 13° and Türksat 1C 42° east. If no other
satellite position is requested, please push the green knob on remote control (saving) and leave the
main menu with “EXIST”.
The receiver switch automatically to first satellite position (ASTRA 19.2°).
If other satellite positions should be received which are pre-set, select new satellite and push red
knob on remote control. The receiver turns automatically into program installation menu and start
program setting.