Assembly & Operation Manual
Trial fit rudder to fin. Check clearance for belcrank.
The rudder hinge is 2 pieces of piano wire. One piece from top and other piece
from bottom.
NOTE : ( I have found that on my kit to much slop in hole for piano wire. I made a
bush for each hinge)
Slide the piano wire into place. Once in place use clear tape to prevent wire from
falling out.
Make 2 pushrods for rudder. Secure pushrods.
Trial fir fearing and mark location on belcrank exit.
Cut holes to clear belcrank;
When happy secure fearing with 4 screws.
This complete this section.
P-17
Photo 26
Photo 28
Photo 39
Photo 40
Photo 41
Photo 42
Photo 43
