Fit 2 x L-brackets to 8511 servos.
Secure servo horn to servo and set travel with TX.
Fit servo to ply mount with horn facing up.
Draw line perpendicular to hinge line and mark location of flap horn.
Secure pushrod to servo horn.
Cut slot for flap horn.
Glue horn in position. When cured check operation of flap.
Feed servo wires though ribs until it reaches the rot rib.
Cut hole for servo wires and secure with cable ties.
Repeat for other wing.
Fit servo covers.
Trial fit wings to fuselage and mark location of hole for servo wires.
NOTE : Use your own favorite connection between wings and fuselage. MPX plugs work
well and make joining and removing wings easy.
Install tip tanks. You can either glue it permanent or make it removable.
This complete this section.
P-14
Assembly & Operation Manual
Photo 23
Photo 24
Photo 24
Photo 25
Photo 26
