Assembly & Operation Manual
FUSELAGE JOINT
Route all air tubing and servo wires clear of tank.
Secure front fuselage with
8 x M4
.
Photo 47
FUEL CELLS
NOTE: Bad plumbing lead to flame outs. This will destroy your model. Please take your
time and do a good job.
Make up fuel line fittings. Make sure clunk moves freely and reaches all corners of
inside of tanks.
Fit to main tank. Mark pipes for “inlet” and “outlet”.
Secure 2 saddle tanks in position. Saddle tanks will feed
main tank. The main tank will feed UAT.
Plumb tank using diagram on next page.
Fill tank and check for leaks.
Drain tank with turbine fuel pump and check no air
Bubbles in system until last drop is drained. A good
plumbing will secure good turbine operation.
SMOKE TANK:
Note : Optional smoke tank can be installed infront of turbine!
P-17
Photo 48
Photo 51
Photo 52
Photo 49
Photo 50
Photo 53
