SkyLink Pro USB Personal VoIP Gateway, Руководство пользователя

Страница: 36 / 48

Page 36 of 48 Ver 2.3
•
Set your password and press apply as shown below. The password can be any 4 to
8 digits
When you call into your telephone line you will hear a beep. Enter the pin code followed
by the * button and then enter the Skype speed dial (e.g. 77) or the SkypeOut telephone
number (e.g. 00 + country code + telephone number) followed by the * button.
In order perform toll bypass on an incoming Skype call, enable Toll Bypass in the VoIP
to Phone Line section. When you Skype into the Skylink Pro adaptor, you will hear a
beep. Enter the pin code followed by the * button and then enter the telephone number
you want to dial on the PSTN line followed by the * key.
As you can see in the screenshot above, when forwarding is enabled, the driver will
disable the computer
’
s ability to go to standby mode. When the computer tries to go into
a standby mode, you will see the following popup:
If the computer goes to sleep, then toll bypass will not work. To turn this feature off,
uncheck the
“
Disable Standby/Hibernate
”
check box.