3. OPERATION (CONT)
Chamberlain
®
, Lift-Master
®
, Sears Craftsman
®
Multi-Function
Wall Console
There are 3 buttons on the Multi-Function Wall Console:
1) Push Button - Open / Close garage door.
2) Lock Button - Enable / Disable handheld remotes to operate the garage
door opener.
3) Light Button - Turn on / off light.
Skylink
®
Garage One
TM
also has 3 buttons, their functions are identical to
the Chamberlain
®
/ Lift-Master
®
/ Sears Craftsman
®
wall console.
Chamberlain
®
/ Lift-Master
®
/
Function
Equivalent button on
Sears
®
Skylink
®
Garage One
TM
Push Bar
Open / Close door
Push Button
Lock Button
Lock Button
Light Button
Turn light on / off
Learn Button
5. ACCESSORIES
Optional accessories can be added to the garage door closer.
4-Button Keychain Remote – Model 4B-201
- Keychain remote can be programmed to the garage
door closer so it operates the garage door opener
like an ordinary remote control
- It transmits Skylink
®
rolling code
- Multiple buttons allow operation of multiple garage
door openers and lighting / appliances control
- 12V Alkaline battery included
Garage Door Monitor
TM
Sensor – Model GS-101
- Detects garage door position
- Patented sensing technology
- Closes garage door automatically with the preset
timer when work in conjunction with Garage One
TM
- Lithium battery included
Enable / Disable operation
from handheld remotes
Prevents operation
from handheld remotes
Turn light on / off
Open / Close door
Chamberlain
®
The Keypad Transmitter operates on two 3 volt lithium batteries (CR2032).
This transmitter comes with the batteries already installed. It is time to
replace the batteries when the low battery indication is on. Low battery
condition is indicated by the “LO BATT” light on
when the keypad is activated.
To replace the batteries:
1. Remove the keypad transmitter from the wall.
2. Undo the screw on the back of the unit.
3. Use a screwdriver to open the battery compart-
ment by rotating it.
4. Remove the batteries from the battery com-
partment.
5. Place the new batteries in position. See diagram.
6. Close the battery compartment and reinsert the
screw.
+
4. BATTERY
5. ACCESSORIES (CONT)
Audio Sensor – Model AS-101
- The Audio Sensor is to be used in conjunction with
the Skylink
®
garage door closer and any CO detector
(sold separately). It is used to detect the CO emission
inside the garage.
- When the CO level exceeds the safety limit, the alarm
from the CO detector will sound, which will trigger
Skylink’s Audio Sensor. Skylink
®
wall console will
open the garage door for 10 minutes to improve air
circulation. Door will then be closed automatically
after the CO level resumes within the safety limit.
8. WARRANTY
If, within one year from date of purchase, this pro duct should become defective
(except battery), due to faulty workmanship or materials, it will be repaired or
replaced, without charge. Proof of purchase and a Return Authorization are required.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment dose cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
6. FCC
To prevent possible SERIOUS INJURY or DEATH from a closing garage door:
- Activate door ONLY when it can be seen clearly, is properly adjusted, and there
are no obstructions to door travel.
- ALWAYS keep garage door in sight until completely closed. NEVER permit
anyone to cross path of closing garage door.
7. WARNING
CUSTOMER SERVICE
17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3
Email:[email protected]
http://www.skylinkhome.com
P/N. 101A449
US Patent. 6243000B1
Patent Pending
® are registered trademarks of their respective corporations
©2006 SKYLINK GROUP
If you would like to order Skylink’s products or have difficulty getting them to work,
please :
1. visit our FAQ section at www.skylinkhome.com , or
2. email us at [email protected] , or
3. call our toll free at 1-800-304-1187 from Monday to Friday, 9 am to 5 pm EST.
Fax (800) 286-1320
9. CUSTOMER SERVICE