DOOR/WINDOW SENSOR Model 2GS9 PRELIMINARY COPY
1. INTRODUCTION
The sensor is designed to monitor the status of your garage door and work with the Skylink
Receiver. When the monitored garage door is opened or closed, the sensor will send signal to the
receiver and alert you the status.
In this package, you should find a sensor and mounting accessories.
Please follow the instructions below to setup the garage door sensor.
2. INSTALLATION
i)
Remove the top cover of the sensor and insert one AA battery (sold separate) to the sensor
as shown in the diagram.
ii) Press and hold the learn button in the receiver unit, release the button when the receiver
emits a beep. The zone red LED on the receiver will flash.
iii)
Tilt the sensor from vertical to horizontal to activate it.
iv)
T
he receiver unit will emit a long beep indicating it has learned the code from the sensor.
MOUNTING LOCATION
Mount the sensor near the top panel of your garage door or the appropriate location by either
double sided tape or screws.
OPERATION
The sensor will transmit the signal to the receiver when detect the door is open, the receiver will
beep / alarm and the corresponding zone LED will flash.
