SECTION 1, Page 6
SJKB Battery Powered
NOTES
SECTION 2, Page 9
SJKB Battery Powered
26.
TO SOUND THE HORN: Depress the red
push-button on the Drive/Steer Controller.
Shutdown Procedure
1.
Fully lower the platform.
21.
TO LEVEL THE PLATFORM (Platform is
tilted toward the jib): Press and hold the
Platform Leveling Toggle Switch to the “
ò
“
(down) position. To stop release the switch.
22.
TO ROTATE THE PLATFORM TO THE LEFT:
Press and hold the Turret Rotate Toggle Switch
to the “
ï
“ (left) position. Release the switch
to stop.
23.
TO ROTATE THE PLATFORM TO THE RIGHT:
Press and hold the Turret Rotate Toggle Switch
to the “
ð
“ (right) position. Release the switch
to stop.
24.
TO RETRACT THE BOOM ARM: Press and
hold the Boom Extend/Retract Toggle Switch
to the “
ñ
“ (retract) position. Release the
switch to stop.
25.
TO EXTEND THE BOOM ARM: Press and hold
the Boom Extend/Retract Toggle Switch to the
“
ò
“ (extend) position. Release the switch to
stop.
2.
Push in the Emergency Stop Buttons.
3.
Rotate the Off/Platform/Base Key Switch to
the ” “(off) position. Remove the key.
Loading and Tie Down Procedure
1.
With the telescopic boom fully retracted and
trailer on firm level ground. Align the tires of the
boom with the back end of the trailer.
2.
Slightly raise the jib for ground clearance while
loading. Slowly and carefully drive the machine
on to the trailer.
NOTE
For loading and unloading using a winch line, see
the brake release procedures in this section.
REMEMBER
Operating any hydraulic function will reset the
parking brake.
3.
With machine loaded on trailer, tie down as
recommended. (Refer to Figure 2-9.)
Figure 2-9. Recommended Tie Down Locations
MA33N210
4.
Separate the 350 amp battery connectors.
