9
REMOTE CONTROL OPERATION
•
The SkyfanDC Remote control comes pre-paired at the factory and is ready to use.
Pairing will only be required in situations mentioned below.
•
A remote control consists of two parts .
1. Handset (transmitter) controller.
For fan models “with light”
Fan ‘ON’ and ‘OFF’ (starts on speed 3)
LIGHT
Switches light ‘ON’ then scrolls through colours: WW
- NW - CW - OFF (starts on WW)
Scrolls through colours: WW-NW-CW (starts on WW)
+
Increases fan speed until Max (speed 5)
-
Reduces fan speed until Min (speed 1)
+
Increases light brightness
-
Reduces light brightness
TIMER
Run on Timer with 12 setting options (1hr to 12hrs)
MODE F/R
Presses to switch ECO, SLEEP and NORMAL
MODE
ECO, SLEEP and NORMAL
ECO MODE
1
st
press - Fan will operate at peak energy efficiency
level, usually somewhere between speeds 1 and 2
SLEEP MODE
2
nd
press - Fan will reduce by 1 speed every 30 min
until speed 1.
(select preferred starting speed level first)
NORMAL
3
rd
press – Cancels Mode and returns to normal
function Please note;
+
and
-
will not
operate during ‘SLEEP’ or ‘ECO’ modes.
MODE F/R
Long presses by 3 seconds to switch to Summer and
Winter modes
Forward-Downdraft for cooling (summer mode)
Reverse-Updraft for heat circulation(winter mode)
• A remote control consists of two parts.
1. Handset (transmitter) controller.
2. Receiver. Receives messages from the handset and is located in upper canopy
of the fan.
• The Skyfan DC remote control comes pre-paired at the factory and is ready
to use.
Pairing will only be required in situations mentioned below.
1. Using 1 remote handset to control 2 or more Skyfan DC Ceiling fans
• Choose the fan you wish to pair with your handset.
• Turn isolation switch ‘ON’ and
within 20 seconds
press and hold on the
remote for 3 seconds. The fan will emit a ‘beep beep’ sound to indicate
the pairing process is activated.
• Press and change the speed of the ceiling fan via the remote to check the
operation and successful pairing.
2. Loss of function or control between hand piece and receiver
• Try the re-pairing process as outlined above (point 1). If the problem persists,
call Ventair technical support on 1300 665 926.
3. Replacing an old or damaged handset
• If you are replacing a handset only (not the receiver), the repairing process
(point 1) will need to be performed before operation of the fan is possible.
9
REMOTE CONTROL OPERATION
Handset
Reciever
