5
BLADE ATTACHMENT
1. Insert the blades (x3) into the blade holding slots on the motor housing, slide downward and click into
position‘.
2. Insert the 2 safety screws ,being careful not to over-tighten
3. Move motor housing canopy downward until covering the motor housing.
Lift the fan assembly onto the mounting bracket. Ensure that
slot (A)
of the hanger ball is fully
aligned/engaged with the
Tab (B)
of the mounting bracket
(C)
to prevent the fan from rotating when in
operation. (Fig.6)
Fig. 3
HANGING THE FAN
QUICK ‘CLICK’ BLADE INSTALLATION
Motor housing canopy
Safety screws
Slot
5
BLADE ATTACHMENT
1. Insert the blades (x3) into the blade holding slots on the motor housing, slide downward and click into
position‘.
2. Insert the 2 safety screws ,being careful not to over-tighten
3. Move motor housing canopy downward until covering the motor housing.
Lift the fan assembly onto the mounting bracket. Ensure that
slot (A)
of the hanger ball is fully
aligned/engaged with the
Tab (B)
of the mounting bracket
(C)
to prevent the fan from rotating when in
operation. (Fig.6)
Fig. 3
HANGING THE FAN
QUICK ‘CLICK’ BLADE INSTALLATION
Motor housing canopy
Safety screws
Slot
4
MOUNTING BRACKET
•
The ceiling fan must be installed in a location so that the blades have a minimum 300mm spacing
from the tip of the blade to the nearest objects or walls.
•
Secure the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least
20kg, with the two Fixing screws provided. Ensure at least 30mm of the screw is threaded into the
support structure.
NOTE: The bracket fixing screws provided are for use with wooden structures only. These
screws are designed specifically for this purpose, and use of other types of screws, ie, bugle
headed screw, may void the warranty.
For structures other than wood, the appropriate screw type MUST be used.
•
Secure the safety wire to the ceiling joist or other suitable fixing point.
Fig. 3
Angled Ceiling Installation
This fan hanging system supports a maximum 15-degree angled ceiling installation. (FIG 4)
Please note: the Tab (B) on the hang bracket that sits in the groove (A) on the hanging ball should be
positioned at the highest point to ensure correct operation. (FIG 6)
Fig 4 (show Fig 5 here also
INSTALLATION
Fg.
UP TO 20KG
This should come after
hanging the fan
4
MOUNTING BRACKET
•
The ceiling fan must be installed in a location so that the blades have a minimum 300mm spacing
from the tip of the blade to the nearest objects or walls.
•
Secure the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least
20kg, with the two Fixing screws provided. Ensure at least 30mm of the screw is threaded into the
support structure.
NOTE: The bracket fixing screws provided are for use with wooden structures only. These
screws are designed specifically for this purpose, and use of other types of screws, ie, bugle
headed screw, may void the warranty.
For structures other than wood, the appropriate screw type MUST be used.
•
Secure the safety wire to the ceiling joist or other suitable fixing point.
Fig. 3
Angled Ceiling Installation
This fan hanging system supports a maximum 15-degree angled ceiling installation. (FIG 4)
Please note: the Tab (B) on the hang bracket that sits in the groove (A) on the hanging ball should be
positioned at the highest point to ensure correct operation. (FIG 6)
Fig 4 (show Fig 5 here also
INSTALLATION
Fg.
UP TO 20KG
This should come after
hanging the fan
5
HANGING THE FAN
ANGLED CEILING INSTALLATION
Lift the fan assembly onto the mounting bracket. Ensure that
slot (A)
of the hanger ball is fully
aligned/engaged with the
Tab (B)
of the mounting bracket
(C)
to prevent the fan from rotating
when in operation. Fig. 3)
This fan hanging system supports a maximum 15-degree angled installation. (Fig 4)
Please note: the Tab (B) on the hanging bracket that sits in the groove (A) on the hanging ball
should be positioned at the highest point to ensure correct operation.
Secure the safety wire to
the ceiling joist or other suit-
able fixing point.
Highest Point
FINISHING THE INSTALLATION
• Complete the electrical connection at the mounting bracket terminal block.
NOTE: Skyfan DC is a class 2 electrical product.
(Refer to Fig 6.).
• Connect fan to the receiver (can be done before or after sliding receiver into place).
A.
For fan models without light, plug cable marked ‘motor’ into remote control box.
See Fig 7.2
B.
For fan models with light, plug cable marked ‘motor’ and ‘LED’ into remote control box.
See Fig 7.1
• Slide receiver into position in the hanging bracket making sure the AC input connecter on
the receiver is aligned with the AC port on the receiver. Refer Fig 7.1. on page 7.
