Flight manual
inter
plane
Skyboy
EX
Page 4 - 4
4.9 CIRCUIT FLIGHT
After attainment circuit height adjust the speed of horizontal flight on the value 43 to 54 knots
(50 to 62 mph or 80 - 100 km/hour )
by decrease of revolutions.
4.10 GLIDING FLIGHT
After attainment of suitable height for gliding flight or when an emergency situation arises, take over the airplane
into the gliding flight with starting speed 40 knots
(47 mph or 75 km/hour ).
By flight height and situation adjust the speed to the safety gliding speed 46 to50 knots
( 53 to 56 mph or 85 - 90
km/hour ).
At this speed finish all phases of landing.
4.11 ELEMENTAL PROCEDURES
ON THE LEVEL OF LANDING T
1. Revolutions
- increased idling or engine idling
2. Safety belts
- tightened
3. Checking of circuit - T space and runway
- space between 3. and 4. turn
4. Checking of fuel
4.12 LANDING
Adjust angle of glide so that it corresponds with the safety gliding speed 46 to51knots
(53 to 60 mph or 85 - 95 km/hour).
After leveling out (circa height 16 ft , 5 m ) in dwell, decrease flight speed by continuous pulling of the elevator,
until the airplane lands with speed circa 35 knots
(40 mph or 65 km/hour )
at first on the main gear. After finishing
elevator effect the airplane lands on the nose-wheel undercarriage.
4.13 ELEMENTAL PROCEDURES AFTER LANDING
1. Revolutions
- according requirement
2. Speed
- adjust on rolling speed maximum 5 knots
(6 mph or 10 km/hour )
After landing run quickly leave runway usually in direction of the alignment of landing T axis.
