T
ELESCOPE
ASSEMBLY
F
INDERSCOPE
A ASSEMBLY
E
YEPIECE
A ASSEMBLY
4
ATTACHING THE TELESCOPE
MAIN TUBE TO TUBE RINGS (9)
1) Remove the telescope tube from the
paper covering.
2) Find the center of balance of the telescope tube.
Place this in between the two tube rings. Close
the hinges around the telescope and fasten
securely by tightening the thumb nuts.
ATTACHING THE TUBE RINGS TO MOUNT(8)
1) Remove the telescope tube assembly
from its plastic packaging.
2) Remove the tube rings from telescope by
releasing their thumb nuts and opening their hinges.
3) Using the bolts provided, fasten the tube rings to
the mount with the 10mm wench provided.
8.
9.
ATTACHING THE FINDERSCOPE BRACKET (10)
1) Locate finderscope optical assembly.
2) Slide finderscope bracket into the rectancular slot
and tightened screw to hold mount in place.
10.
INSERTING EYEPIECE
(11), (12)
1) Unscrew the thumbscrews on the end of the
focus tube to remove the black plastic end-cap.
2) Re-tighten thumb screws to hold
eyepieces in place.
12.
11.
