48
Enter the WEP or WPA/WPA 2 code to connect the WiFi.
Press the Left < cursor button to correct incorrect entries.
Wireless Network (WPS PBC)
If you are using a router with WPS/QSS button, you can choose to set
up the network connection simply via WPS function. Select the function
and press the WPS/QSS button on your router within 120 seconds. The
connection between the router and the device will then be configured
automatically.
Note: The connection might not work with all WPS router.
Manual Configuration
You can choose DHPC (which IP assigned automatically) or manually
input IP address for wireless network connection.
When you select manual setting for wired connection, the following has
to be entered:
1. SSID (the name of Access Point);
2. IP Address
3. Subnet Mask
4. Default Gateway
5. Preferred DNS Server
6. Alternate DNS Server
You may choose (Manage) specific network if you have setup more than
one network connection within an area.
Check Network when Power On
“Enable / disable WIFI network”:
When you enable the WIFI network, the system will automatically search
the available AP.
Select your required AP.
Enter the WIFI password to connect to the wireless network.
