40
The number of bars in the wireless symbol in front of the network name
(SSID) shows the relative signal strength of the network.
The key symbol indicated that the network is password-protected.
If the device does not find any wireless networks, “No Wireless Networks
Found” appears on the LCD display. Change your location, if necessary,
and check your WLAN router.
You can find the SSID of your Access Point in the configuration of the
Access Point (router).
Select your network and confirm with
OK.
If your WLAN is password-
protected, you will be prompted to enter your password.
The password can be entered by using the rotary button and cursor
buttons or by using the remote control.
Enter the password by using the rotary knob and cursor buttons:
• Rotate the rotary knob to select the respective number / letter
•
Press onto the Left < cursor button to go
to previous entry space,
entry can be overwritten
•
Press the Right > cursor button to go to
next entry space, the last
entry is saved.
•
Press onto the rotary knob (OK) to
confirm the entry.
Note:
Letters available A – Z and a – z
Available numbers: 0 – 9
Other available characters: DEL, @, BLANK, !, “, #, %, &, *, ´,, + and
(,)
Use small and capital letters while entering the password.
Password Entry with Remote Control
• The cursor indicates the current entry location.
• Press the corresponding number button, repeatedly
