4O3A Signature – Antenna Genius User Manual
Page
37
of
55
11.
ADDITIONAL FEATURES
11.1.
Custom Band Configuration
In the configuration window, click the
Configure Bands
button.
Band Configuration dialog will pop-up.
You can manually tweak and adjust any band
frequency range. Four new custom bands
reserved for non-standard bands.
If you have multiple overlapping frequency
ranges, the first port will always be selected.
These settings are saved in the main
configuration file. Press
Accept
, then
Save &
Reboot
to apply changes.
11.2.
Output Module Relay Control
You can now control our OM modules, originally designed for Station Genius. OM Module is
actually a relay switching board, with 16 pairs of outputs.
11.2.1 Output Module Hardware
Outputs P1A and Outputs P1B are different contact of DPDT relays. Each port can be used
differently
to supply internal 12V (not recommended), any external voltage, or GND.
In other words:
•
Every logical output (Outputs labeled 1,2,3... in software/on the sticker) has two physical
outputs (P1A, P1B).
•
This is to enable switching of two separate independent devices.
•
These two physical outputs can be configured differently.
•
Either one of them can be set to in12V, external voltage or GND.
Port 2 outputs, pinout, jumpers are the same as for Port 1.
