3.
Bluetooth
If the bluetooth indicator lamp is red, this means that bluetooth is not connected; green means that it is
connected.
4.
Pulse indicator lamp
In the process of measuring blood pressure, if the heartbeat is detected, the three "indicator lamp
pulse measurement indicator lamps" on the device's obverse side will go on in turn from bottom to top
and then go out successively. The representation of one heartbeat is then complete. The indicator
lamps only light up when the heartbeat is detected in the process of taking a pulse reading. Otherwise
they will be off all the time.
5.
Charging
This device has its own Micro-USB charging port, and you can use phone chargers or data lines with
the same interface to charge it. If the device shows "Low Battery", please charge it immediately.
During charging the "charging indicator lamp" will go on; once the charge is complete, the indicator
lamp will go out.
Preparations for Measurement
Installing app software on the display terminal
The XM-01 electronic sphygmomanometer supports Android and IOS app software. Before using the
sphygmomanometer, please ensure the following items are in order.
1)
The Health cloud application software has been installed on the display terminal of the mobile
phone or tablet PC. If it is not installed, please log in to the official website www.tcxy.com.cn to
download and install it.
2) The mobile phone or tablet PC display terminal can connect to the Internet (WIFI and 3G are
OK).
3)
Bluetooth on the display terminal has been opened.
4)
The software is suitable for Android version 4.0 and higher and IOS version 6.0 and higher. If the
system software version is earlier than this, first update the system software.
5)
The sphygmomanometer device is switched on and Bluetooth has been opened.