SKY-HERO Little Six, Быстрый старт, Страница: 14 / 31

14
MOUNTING THE ARMS ONTO THE FRAME
Returning to the upper chassis that you partly assembled in the section
«Assembling the Top Frame»
, attach all arms in accordance with the direction of rotation of the motors displayed on the diagram in section
«Aircraft Motor rotation and Identification»
Ensure that all cables exit their carbon tubes, passing across the arm insert (see next page) and into the center of the
aircraft.
Do not forget to leave enough loose cable to allow the arms to be folded back
FRONT ARMS:
Align the holes in the chassis with the plastic insert, and use a M4x40mm button head screw (16) into hole A and tempo-
rarily secure with a M4 knurl button long (17).
CENTRAL ARMS:
Align the holes as before and use a M4x40mm button head screw (16) into hole B and loosely secure with a M4 knurl
button long (17).
Rear arms :
Align the holes as before and use a M4x40mm button head screw (16) into hole B and loosely secure with a M4 knurl
button long (17).
17
16
Note:
•
Do not fully tighten the M4 knurled nuts (17), until you have attached the lower frame (see later section)
•
Handle the chassis with care because until both the top and bottom frame are attached, the weight of the arm, equip-
ped their engines on a single chassis frame, can cause it to flex