SKY-HERO ANAKIN ARF, Руководство пользователя

Страница: 16 / 19

16 15
7
- Now you can see your signal power level on your Link9 radio
Signal power l ev el:
Lo id High
HOW TO CONNECT & BIND (with Sky-Hero LINK9 RX & TX)
FLIGHT MODES
1. STABILIZED SUPER SOFT: (ATTIT DE MODE) - Switch 3 in P postion
Anakin comes back to a flat position when LEFT STICK is back to neutral position - The maximal angle of the drone is ERY LIMITED.
2. STABILIZED SOFT: (ATTIT DE MODE) - Switch 3 in MIDDLE postion
Anakin comes back to a flat position when LEFT STICK is back to neutral position - The maximal angle of the drone is LIMITED.
3. RATE: (RATIT DE MODE) - Switch 3 in DO N postion
Anakin comes back to a flat position when LEFT STICK is back to neutral position - The maximal angle of the drone is NLIMITED.
Then:
Turn your Link9 on
Plug your lipo in your model
Push and hold the bind button until the Led start blinking
Push again the button again until it starts blinking blue (meaning S.B S -
mode)
Once the Led turns solid blue, it s bound
BASIC COMMANDS
See hereunder how to control your Anakin.
T : it cannot hold the central position when released.
Roll: it can return to the central position when released.
Pitch: it can return to the central position when released
Yaw: it can return to the central position when released.
LEFT STICK RIGHT STICK
ODE 1
Pitch: it can return to the central position when released
Roll: it can return to the central position when released.
T : it cannot hold the central position when released.
Yaw: it can return to the central position when released.
LEFT STICK RIGHT STICK
ith Link9. you have to connect with the cable as shown on the picture.
(Yellow cable is not used)
To CC3D Flight
Controller «Main» port