SKY Engines Boxer 220s Скачать руководство пользователя | Manualshive

Страница: 36 / 39

background image

6.0 WARRANTY

6.1 REQUIREMENTS

The warranty is valid for 12 months from sale or the 12 months after the delivery
date of the dealer to the client. The requirements are indicated below:

2) THE WARRANTY COVERS:

- all spare parts and work with the exception of transport costs that remain the
buyer’s responsibility and is applied only in cases of correct use and
maintenance of the product.
To request parts under warranty:
- send an e-mail or fax always indicating the serial number found on the side of the
engine casing, always attach the photo of the damaged spare part, clearly
displaying the damage and specifying the problem in detail; if you have not
purchased directly from us, please contact your dealer first.

3) THE WARRANTY DOES NOT COVER:

- malfunctions/breakages due to improper use of the product, or negligence
- changes made to the engine not originating and not authorised by Sky Engines
s.r.l.
- normal wear of all items, parts and spare accessories
- damage due to omission of accurate maintenance
- damage due to engine operation without the propeller
- damage due to erosion
- damage due to use of petrol without added lubricant, causing stalling
- use of the parts not designed by Sky Engines
- use of propellers that exceed the rotation limitations as specified by Sky
Engines s.r.l
- loss of parts in flight due to improper tightening of the parts for assembly and
dismantling due to relevant transport by the owner
- damage due to accidents, injuries, abuse or negligence by the owner or on
behalf of the owner.
- damage due to any suction of foreign material
- damage caused by an incompetent mechanic or unqualified staff
4) SPECIAL WARNINGS: This is
not a certified engine!
Any modifications made by the buyer to the engine or the removal of original
parts can make using the engine risky!
The user acknowledges all the risks of use and acknowledges that the engine could
switch off during use.
DO NOT HESITATE TO CONTACT SKY ENGINES S.R.L FOR ANY FURTHER
INFORMATION NECESSARY FOR USE OF THIS ENGINE.

«
...
34
35
36
37
38
...
»

Содержание Boxer 220s








































Отзывы:

Нет отзывов

Похожие инструкции для Boxer 220s

Бренд: EuroLite Страницы: 19

Бренд: Vanguard Страницы: 124

Бренд: A'OK Страницы: 7

Бренд: STG-BEIKIRCH Страницы: 7

MotorLift RA20F

Бренд: Chamberlain Страницы: 24

Бренд: Chamberlain Страницы: 40

Бренд: Stober Страницы: 6

HYPERPOOL SHAKER

Бренд: DERRICK Страницы: 118

Бренд: Honda Страницы: 437

Бренд: Volvo Penta Страницы: 116

Бренд: panthera Страницы: 12

Allen-Bradley C180ATZ

Бренд: Rockwell Automation Страницы: 24

Бренд: DLE Страницы: 4

ZAtop SM250.100C

Бренд: ZIEHL-ABEGG Страницы: 16

Бренд: Wood-mizer Страницы: 24

Бренд: Milwaukee Страницы: 43

Бренд: Milwaukee Страницы: 54

2007 250 EXC-F SIX DAYS

Бренд: KTM Страницы: 68

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды