
Risers
Discovery-3 has the risers scheme
A2A’1B4C3. The risers are equipped
with speed system, that increases the
speed range of the glider.
Accelerator System Adjustment
Discovery-3 construction enables you to use it with an accelerator. To set up the
accelerator on the ground:
1. Attach the risers to the harness.
2. Attach the accelerator.
3. Sit in your harness.
4. Ask a friend to pull your risers into their in-flight position.
5. While sitting in the harness, stretch your legs and push the loop of the accelera
-
tor as much as possible. (The rope will be stretched when pulled).
6. With your legs stretched, choose the length of the lead in such a way that accel
-
erator harness is fully stretched and the pulleys on the risers touch.
7. Fix with a tie this length of the accelerator rope.
The accelerator rope should not pull the accelerator in normal flight. Otherwise, the
permanently-speeded-up paraglider will not provide the declared reliability for col
-
lapses. You must set up the accelerator properly and make sure it is not entangled!
Содержание DISCOVERY 3
Страница 1: ......
Страница 13: ...Line plan You can use this scheme if you want to order the new line instead of damaged ...
Страница 15: ...Discovery 3 Wing check and repairs information ...
Страница 19: ......