Page 10
FIGURE 9: Humidifier Frame
Mark and drill two or three of the mounting holes 7/64" (0.28 cm) in
diameter, and temporarily attach the mounting frame with #8 sheet
metal screws. Mark the remaining holes and center the opening, as
shown in Figures 10 (
Model 55
) and 11 (
Model 86
), below.
DANGER:
Do not cut or drill into air conditioning or elec-
trical accessories during installation. Blindness can occur
if refrigerant comes in contact with your eyes; electrocu-
tion is possible if you touch a live electrical circuit.
2.
fIGURe 10: Model 55 Opening
fIGURe 11: Model 86 Opening
