Skullcandy Portable Link, Руководство пользователя

Страница: 7 / 40

ENGLISH
12
ENGLISH
13
Connecting the BT LINK to Your Helmet or
Headphones
Connecting the BT LINK to your helmet
Perform these steps to connect your BT LINK to
your helmet.
1. Open the audio pocket on each earpad, remove the
round pieces of foam padding, and slip in our Audio
Drops speakers.
2. Slip the short headset jack from the speakers through
the hole at the bottom of either earpad.
Note: If you purchased a Giro Audio Series Helmet
already equipped with Audio Drops speakers,
please skip to Step 4.
3. Tuck the audio wire connecting both speakers either
under the padding inside the back of the helmet or inside
the neckroll pocket, depending on the helmet model.
4. Connect your BT LINK to the Audio Drops speakers
using the 3.5mm/3.5mm stereo audio cable. Tuck the
headset jack back up into the earpad, if desired.