sks 30008701, Руководство по установке

Страница: 17 / 20

17
Support Hotline: +49 (0) 2661 98088-112
Support E-Mail: support@sks-kinkel.de
Version No. 1.0
Document No. 97016900
SKS-Kinkel Elektronik GmbH
30008701 Diagnostic tool
EN
A = BUS command
B = BUS voltage
C = Signal level in % (ideal > 90%)
D = Frequency (ideal 22,3 kHz)
E = Number of pulses at the
receiver‘s input between two
BUS commands
1 = General Reset
Resetting the system or rather the BUS line (idle mode)
2 = HTSNr :
Door station no., from which the door call was sent (1 to 8)
3 = HR1
Door call 1 with call address A1
4 = SpBer :
Ready to speak, i. e. the receiver has been picked up at the indoor
station with call address A1
5 = TOE1
Door opener command has been sentfrom the indoor station with
the call address A1
6.2.2
Overview of possible commands
Display BUS command Description
General Reset General reset After this the systems changes into idle mode
HR1 Door call 1
HR2 Door call 2
SpBer Ready for speaking Speaking connection activated
Aufgel Receiver put down Speaking connection ended
TOE1 Door opener 1 Door opener command sent
TOE2 Door opener 2 Door opener command sent
Conc0 Concierge 0 Special command 1, the receiver has been put down
Conc1 Concierge 1 Special command 2, the receiver has been picked up
Licht Light command
KnaEin Crackling sound on
KnaAus Crackling sound off
KamUm Switching camera command Only for 6-wire systems
HTSNr Door station number Door station number from which the command has been
sent
KamNr Choose camera number
AktVer Extend active time Only for 6-wire systems, extends the video compact
power supply‘s active time
DisplOn Display at indoor station active Determins the number of active displays at indoor sta-
tions in the system
UnbekBefehl Command unknown