Skriware Skriware 1, Руководство пользователя

Страница: 17 / 20

17
12. Levelling the printing platform
In order for your models to turn out exactly the way you want them to, it is important that the printing platform
is levelled. Before you follow the instruction of the levelling process you will need a standard piece of paper.
Levelling dials are located under the printing platform. They may seem difficult to turn at first.
In the main menu go to SETTINGS , then press LEVEL . Read the prompt and click CONTINUE .
All three dials need to be adjusted in the way shown on the display so that the piece of paper can slide between
the magnetic bed and the hotend with a little bit of resistance. Keep pressing CONTINUE and adjusting the di-
als until you are sure they are set up correctly. Press < DONE
when you are finished.