UDJ-1000 Instruction Manual Page
16
With this function a USB device can be loaded into one UDJ-1000, and played by a connected Host USB Player.
Follow the directions below to setup the link function.
MAIN PLAYER:
1. Press the PRESET button to enter the internal menu.
2. Once you are in the internal menu, turn the FOLDER knob until MIDI SETUP is displayed.
3. Press the SHIFT button and turn TRACK knob until the USB = LINK is displayed, and press the PRESET button
to save the setting and exit.
4. Now load your USB1 device into the MAIN PLAYER.
5. Connect the MAIN PLAYER using the rear USB MIDI port to the second player top USB port.
6. You should now be able to access the main player loaded USB device using the second player controls.
(The USB1 device must be read first on the main player top USB1 whenever loaded the device)
MAIN PLAYER (with loaded USB Device)
SECOND PLAYER
WARNING:
It is recommended that the USB Cable be at least
28 gauge or higher and no more than 3 feet long.
LINK UP
