manualshive.com logo in svg

Skov DOL 634 CE, Техническое руководство пользователя

Поделиться
Скачать
Skov DOL 634 CE Скачать руководство пользователя страница 50

DOL 634 CE

50

Technical User Guide

It is possible to save and load a backup of the current settings
and page views.

This can be done either on the house controller's internal CPU
module, SD card or USB stick.

If settings are to be copied to other house controllers, use an
SD card or a USB stick.

13.3.1 Backup of historical data

ARM based CPU module (one LAN port)

IMX based CPU module (two LAN ports)

This CPU module will automatically save
all historical data to the SD card, regard-
less of how menu settings have been
made.

This CPU module will automatically save all
historical data to the internal memory and
only use the SD card as backup media.

13.3.2 SD card and USB stick

Using an SD card or a USB stick it is possible to backup the controller setup and data including settings, pages,
historical data, house name, IP address, calibration values, etc.

In order to prevent data loss when replacing a defective house controller or individual hardware parts, it is possi-
ble to restore all types of data from the SD card.

The USB stick can also be used to copy data from one controller to another and to store data on a PC.

It is possible to make a daily backup of the controller data.

Activate the function 

Daily backup

 under 

SD card

 or 

USB stick

.

Содержание DOL 634 CE





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды