
DOL 31 Speed Controller
10
Technical User Guide
4 Installation guide
Installation, servicing and troubleshooting of all electrical equipment must be carried out by quali-
fied personnel in compliance with the applicable national and international standard EN 60204-1
and any other EU standards that are applicable in Europe.
The installation of a power supply isolator is required for each motor and power supply to facilitate
voltage-free work on the electrical equipment. The power supply isolator is not included.
4.1 Cabling
Cables are led through plastic glands in the bottom section. It is recommended to use armored cable in loca-
tions where there is a risk of rodent attacks.
4.2 Dismantling the AUT-0-MAN switch in DOL 31 16 A
Disconnect the supply voltage.
Dismantle the AUT-0-MAN switch in order to gain access to the screw
terminals.
Turn the lock in the opposite direction of the arrow.
Set the switch to 0.
Dismantle the AUT-0-MAN switch by means of a screwdriver. Push the
switch housing to the left.
Lift out the switch.
Connect power supply in X13-X15.
Connect output in X16-X18.
Set the switch to 0.
Push the AUT-0-MAN switch to the right.
Turn the lock. The arrow indicates the direction.
Содержание DOL 31
Страница 1: ...DOL 31 Speed Controller Technical User Guide 612061 2022 10 17...
Страница 31: ......