5. INSTALLATION OF MODULAR EQUIPMENT ON TANKS OR SILOS.
Modular machines must be installed on tanks or silos, following the
instructions in this manual.
The strength and stability of the container-machine/s assembly must
be checked, as well as the fixing of the elements.
6. ASSEMBLY OF THE DISPERSION CONE (MODULAR
MODELS)
This accessory distributes the ice in the silos,
and prevents it from caking under the outlet
pipe.
By varying its position, the ice can be guided in any direction. (Not
included with the machine).
7. WATER LEVEL
The function of the water level is to maintain the necessary flow in the evaporator and, with
the included micro magnet, stop the operation of the machine until the water reaches the
bucket again.
The optimum level is at the horizontal line indicated in the figure, and its regulation is done
following the instructions of the same.
1
– Float
2
– Probe
3
– Safety overflow
Bend up to raise the level and
down to lower it.
(Take only by the metal arm
NEVER BY THE FLOAT)
