Daylight driving lights*
2
Each remote control key contains a battery which is housed under the cover
⇒
page 1, fig. 2
. If the battery is discharged, the red indicator light
does not light up
after pressing a button on the remote control
⇒
fig. 3
. Change the battery as follows:
– Fold open the key.
– Carefully press off the cover at the points of the arrows
⇒
page 1, fig. 2
.
– Remove the discharged battery from the key by pressing the battery downwards at
the point of the arrow
⇒
page 1, fig. 2
.
– Insert the new battery. Ensure that the “+” symbol on the battery is facing upwards.
The correct polarity is shown on the battery cover.
– Position the battery cover on the key and press on it until it is heard to lock in
place.
Daylight driving lights*
In some countries, the national legal provisions require that the parking lights come on
together with the bulbs for daylight driving lights when activating the function daylight
driving lights.
Automatic rear window wiper* (Combi)
If the windshield wiper lever is in the position
⇒
fig. 4
or
, the rear window wiper
carries out a wiping process every 30 seconds or 10 seconds at a speed above 5 km/h.
When the rain sensor* is active (the lever is in the position
) the function is only
active if the front window wipers continue to operate (no break between each wiping
process).
Activation/deactivation
The function of the automatic rear window wiper is activated/deactivated in the infor-
mation display* in the menu:
Setup
Lights & Vision
Rear wiper
Note
The function of the automatic rear window wiper is only valid for Combi vehicles which
are equipped with the information display*. The function is activated in the factory.
Fig. 3 Remote control key
A
B
A
A
A
1
A
2
Fig. 4 Windscreen wiper lever
A
2
A
3
A
1
s38g.6.book Page 2 Friday, September 18, 2009 1:40 PM
