Operating phones or two-way radio systems may interfere with the functionality
of the electronic systems in your vehicle.
The reasons for this are as follows:
›
no external aerial;
›
incorrectly installed external aerial;
›
transmission power greater than 10 watts.
Note
■
We recommend that the installation of mobile phones and two-way radio sys-
tems in a vehicle be carried out by a specialist garage.
■
The phone features are dependent on the mobile network operators, as well as
the phone being used. Further information is available from the mobile network
operator or to refer to the telephone manual.
■
In signal-free areas the reception can be disturbed or a call will be disconnec-
ted.
■
Most modern electronic equipment is shielded against high frequency signals. In
exceptional cases, electronic equipment may not be shielded against high fre-
quency signals of the telephone and service may be disrupted.
Main menu
Fig. 21
Phone: Main menu
First read and observe the introductory information and safety warn-
ings on page 34.
Explanation of graphic
Name of the mobile network provider
Name of the connected phone, press to open a list of paired phones
Speed dial favourite telephone numbers
» page 40
Direct entry of a phone number
» page 41
A
B
C
Display the phonebook
» page 42
Display of call list (if there are new missed calls, the icon will appear here
with the information about the number of missed calls)
» page 42
Menu Settings Phone
» page 36
Call up the main menu
›
Press the button
TELEPHONE
.
If a phone is connected to the device, the
telephone
mode main menu is dis-
played
» Fig. 21
.
Symbols in the display
Symbol
Meaning
Charge status of the phone battery
a)
Signal strength
a)
Roaming (before the name of the mobile network provider)
a)
Missed call
Current call
a)
This function is only supported by some phones.
Problems with the Telephone function
First read and observe the introductory information and safety warn-
ings on page 34.
If there are problems with the availability of the network or with the Bluetooth
®
function, the following messages appear on the device display screen.
Message
Importance
Network search...
The phone searches for available GSM
networks.
No network
The phone is not connected to the GSM
network.
Rejected by network.
The mobile phone network operator
has rejected the connection (e.g. not
enough mobile phone credit, SIM card
blocked, roaming not available).
To use the Bluetooth function, please
switch the ignition on.
Switch on the ignition.
35
Communication
