BREAK DOWN TEAM SHELTER:
Note: To limit instability caused by wind, keep Base Frame ground stakes secure until the
team Team Shelter canopy is removed from the structure.
» Remove tie-cords if they had been used to secure the Team Shelter.
» Remove the Internal Structure Poles. Unlink them and fold them down to store.
» Remove each toggle from each canopy strap grommet and remove the canopy
strap from the Base Frame.
» Remove the canopy connector clips from each Tension-Tite
™
Pole, followed by the
canopy pins.
» Remove the Tension-Tite Poles from each side of the Base Frame. Unlink them and
fold them down to store.
» Remove ground stakes.
» Break down the Base Frame. Fold and store in Carry Bag (G).
» Dry Canopy before storing.
NOTE: Store Tension-Tite Poles in the carry bag with the round tops facing away from each
other.
i
WARNING:
Always check equipment for worn or damaged parts before use. If any defects are found
do not use product. Never bend poles beyond what is required for setup and break down.
Excessive bending or stress on the poles may cause the poles to splinter and/or break.
Never release the Tension-Tite poles while under tension. Sudden release will cause the poles
to snap back and potentially cause significant injury, disfigurement, or death.
CAUTION:
Stake Team Shelter to the ground in windy conditions to prevent the product from
blowing away or getting damaged.
PERFECT WITH SKLZ SPORT-BENCH:
» Quick and easy set-up - no tools or assembly required
» Includes carry bag with strap for easy transport
» Perfect for sporting events - team or spectators
4 SEAT PORTABLE BENCH
7
ft wide