Training Videos & Articles:
SKLZ.com
facebook.com/
SKLZ
twitter.com/
SKLZ
INSTRUCTION
MANUAL
INCLUDES:
» Rapid Fire II
» Weight Bags (2)
BEFORE YOU BEGIN:
» Read all setup and usage instructions carefully.
» Always check equipment for wear or damage before use. If any is found, do not
use product. If any components are missing, please contact SKLZ toll free
at 1-877-225-7275.
» Adult supervision is required.
» Adult assembly is required.
» Product cannot be used on a fan shaped backboard.
» The product is not suitable for backboards without a metal frame.
» Adult should check security of the bracket before each use.
i
WARNING
:
» Improper use of the Rapid Fire II can result in serious injury. This product is not
intended for use with the following types of shots: lay-ups, dunks, and alley-oops.
i
CAUTION:
» Product cannot be used on fan shape backboard. Product will not be secure and injury
may occur.
» The Rapid Fire II will only work on a metal frame backboard. If you have a molded
backboard the Rapid Fire II will not work correctly.
CARE INSTRUCTIONS:
» Do not store in extreme high or low temperatures to avoid damaging or reducing the
life of the product.
» Do not leave the product outside for long periods of time to avoid damaging or
reducing the life of the product.
Thank you for choosing SKLZ Rapid Fire II. If there is anything else we can do to help you
optimize your training, don’t hesitate to send us an email ([email protected]) or
give us a call (1-877-225-7275).
IMPORTANT:
SAVE THIS INFORMATION IN THE EVENT THAT THE
MANUFACTURER NEEDS TO BE CONTACTED FOR
REPLACEMENT PARTS.
I
SAFETY INSTRUCTIONS:
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR
PROPERTY DAMAGE AND WILL VOID YOUR WARRANTY.
Most injuries are caused by misuse and/or not following instructions. Use caution when using
this product.
SKLZ offers a limited 1-year warranty for this product, visit SKLZ.com for full warranty details
and to register your product.
Parts not to scale
V3
RAPID FIRE II
PARTS:
HARDWARE
:
BRACKET BACK (2)
A
BRACKET FACE (2)
B
ARM (2)
C
EXTENSION ARM (2)
D
BASE (2)
F
WEIGHT BAG (2)
I
BRACKET SCREW (6)
N
KNOB (6)
O
EYE BOLT (2)
P
NUT (2)
Q
ALLEN WRENCH
R
TOP BASE POLE (2)
H
NET
E
BOTTOM BASE POLE (2)
G
THREADED WEDGE (2)
J
UNTHREADED WEDGE (2)
K
LONG ALLEN SCREW (2)
M
WASHER (8)
L
TOP BASE
POLE
BOTTOM
BASE POLE
WEIGHT BAG
NET
EXTENSION
ARM
ARM
BRACKET FACE
BRACKET BACK
BASE
H
G
I
E
D
C
B
A
F
RAPID FIRE II
||||||
||||||||||||||||||||||
||||||||||||||
||||||||
||||||||||||
||||||
||||||
|||
||||
||||||||||||
||||||||||||||||||||||||||
||||
|
||||
||||||||||||
||||||||||||||
Width must be 60" or less
Top frame must be 1.25" or less
Side frame must
be 2.75" or less
Depth must be
2.5" or less
BACKBOARD REQUIREMENTS:
ˆI
WARNING:
Use of the Rapid Fire II on
a backboard that does not
meet these requirements
can lead to serious injury.
RapidFireII_Instr_11x17_sV3.indd 1
7/24/14 3:13 PM
