SKLZ Hurricane Category 4 Скачать руководство пользователя страница 7

Hurricane

 

Category 

4

 Instructions For Use

5

The  Hurricane  Machine’s  energy  source  is  the  “wrapping  and  unwrapping”  of 
the powerbands. The powerbands must be allowed to unwrap before the batter 
hits  the  ball.  Failure  to  allow  the  powerbands  to  unwrap  between  swings  will 
continually  stretch  and  stress  the  powerbands  until  they  fail.  Therefore,  make 
sure the batter understands that allowing the powerbands to unwrap is the only 
way for this machine to work correctly. Misuse is not covered under the warranty 
provisions. To extend the life of the powerbands, remove them from the Hurricane 
when not in use.

N O T E

 

Step 6 – Anchoring your machine  

during use.  

Before setting your machine up for use, 
choose a location indoors or outdoors that 
has sufficient space to allow an adequate 
“24 ft. Safety Zone” during use. To anchor 
your machine on a hard surface, indoors or 
outdoors, use sandbags filled with sand. 
Outdoors you should use the Hurricane 
Machine’s ground pins (H). The ground 
pins are inserted through the holes in each 
leg of the machine. You may have to use 
a hammer to “drive” the ground pins into 
the ground if the ground is hard. Using 
sand bags and ground pins prevents your 
machine from moving during use. Once 
your machine has the sandbags or ground 
pins in place, the machine is ready for use.  

Make sure to read the safety rules before choosing a location for using your 

machine. Make sure to follow all safety rules. Remember to always make 

sure to clear your “safety zone” before using your machine.

Step-By-Step Assembly Instructions 

(continued)

Содержание Hurricane Category 4



















Отзывы: