Skipper GDS101, Процедура замены

Страница: 13 / 14

Note all the cable connections on your dispaly. You may have up to three transducers con -
nected simultainiously. In addition you may have NMEA, Pulse and alarm connections.
J100 Connection table (Write the colour of the connected cables in this table)
Pin No Function Colout of connected wire Pin
No
Function Colout of connected wire
1 +24V 17
2 24V Ground 18
3 Alarm common 19
4 Alarm NO 20 Analog depth
10v
5 Alarm NC 21 Analog Ref
6 Pulses 100/200
p/NM (speed
in)
22 Analog Depth
4-20mA
7 Pulses 100/200
p/NM (speed
in)
23 Analog Ref
8 24
9 25
10 Remote Keyb+
Remote Alarm
Reset
*Note 26 Xducer Scrn
11 Remote Keyb - *Note 27 Xdcr 50kHz
12 +24/ i *Note 28 Xdcr 50kHz
13 Inhibit - 29 Xducer Scrn
14 30 Xdcr 38kHz
15 31 Xdcr 38kHz
16 32 Xducer Scrn
33 Xdcr 200kHz
34 Xdcr 200kHz
*Note: If the device has a remote keyboard. The Jumper JP200 must be in place (betwen Blue relay and
black diode in picture)
SKIPPER RP200
Remote keybord