EML224N Operation and Installation Manual
SKIPPER
Electronics AS
Edition: 2020-22-05
Page 11 of 64
Chapter: 2. Operation
Operation Screens
Each of the operation screens contains a graphic picture and one or more menu sets configured on the 6 soft
key buttons. The various screens are selected by keeping the SCREEN SELECT button pressed and rotating
the encoder in either direction. Turning the encoder clockwise cycle the screens in the sequence 1 to 5, and
counter clockwise rotation cycles the screens in the sequence 5 to1. Screens A and B, covering the primary
functions, may also be cycled by repeatedly pressing the SCREEN SELECT button. Screen COM, STATUS
and CALIBRATION is mainly used for setup and function control, and may only be accessed by the rotating
encoder.
Screen
A
Screen
B
Screen
COM
Screen
STATUS
Screen
CALIB
1. Trip reset
system on/off
2. Manual
override
3. Mounting
settings
2. Pulse
settings
4. Units/
Language
5. Analogue
settings
1. Simulate.
average
2.
COM setup
6. Speed test
1. NMEA setup
3. Date/Time
1. Calibration
*
Normal route using buttons.
Use encoder to get past “barrier”.
* Use hidden button to activiate.
1. System on/off
*
Fig. 2.2. Schematic overview of screens and soft key menus
“Barrier”
Primary Operation screens
“Barrier”
Setup, function and control screens
*
7. EML/DL
Set up
