Skip Model Designs 1200mm Challenger 2, Руководство по сборке

Страница: 6 / 19

At The front of the Model, You now need to add the Main
Undercarriage Plate Doublers ( MUCPD)
These Fit on the inside of F2 and the Sides. Glue with 5 or
15 Min Epoxy. ( Before you do, Read the next few steps
as you can mix 1 Batch of epoxy and do all the steps below
in one hit)
-
---------------------------------------------
Add MUCPD on top of MUCPD2 Ensure all surfaces are
fully Glued
---------------------------------------------
Glue the MUCP TO MUCPD2 AND the fuselage Sides.
Ensure all surfaces are fully Glues