Skip Model Designs 1200mm Challenger 2, Руководство по сборке

Страница: 3 / 19

With Any model build, It is important to test fit components
together before gluing ( Where applicable). 5 Minutes test
Fitting can save hours of Unpicking.
To build ANY COMPONENT of this model, Please make
sure you have a large enough area to work safely, and that
your work bench for the next few months is clean, tidy and
most importantly FLAT
First Part of the build is Fuselage
Find the part which matched the Image, This is the main
part of the fuselage. 80% Of the fuselage is built upside
down. This way the fuselage will be built true.
--------------------------------------------------------
Tack Glue F2 to the main fuselage brace with Medium CA.
Becareful now to stick the entire model to your work bench.
----------------------------------------------------------------------
Add the 2 Fuselage Sides on to the main brace and F2
Again, Only Tack Glue at this stage.