any of the numbered BUS-012 RJ45 jacks (1-8). If properly connected to a BUS-012 hub the
large green port light on the BUS-012 hub should be illuminated.
Cabling should use 26AWG (or larger) Cat5 cable and RJ45 connectors. Cat5 cable should not
be longer than 5 meters (16.4 feet). The Hubs accept only standard RJ45 plugs. Some of the
devices have sealed RJ45 jacks, available from Skip-Line, which will accept either standard or
strain-relieved IP-67 rated plugs. See Appendix B of the SC-12 Manual for instructions on RJ45
568-B connector wiring.
Avoid pinch points where the cable may be damaged from moving parts.
Tips:
● Use a continuity tester for all Cat5 cables
Dimensions:
SC-12 Cab Master: 7.38"W x 7.38"H x 2.64"D
Enclosure Used: Hammond 1590FBK
WARNING!!!
Always unplug all CAT-5 cables prior to any welding on the vehicle. Failure
to do so may result in severe damage to the unit.
